Beer Equipment Factory
 Beer Equipment
 Beer Equipment
HOME>Brewery Equipment>Brewhouse>2 vessels brewhouse> 2 vessels brewhouse

800L 2-vessels Brewhouse

Inquiry Now

▼:600L 2-vessels Brewhouse
▼:1000L 2-vessels Brewhouse


2-Vessels Brewhouse Introduction:
2-vessels Brewhouse is widely used in nano brewery and beer brewpubs.
Construction is Mash/Lauter tank and Kettle/Whirlpool tank. There are copper brewhouse and SUS brewhouse for your optional.
For its small capacity, most of the brewers prefer to use electric heating way for the Kettle tank.
It means there will be electric heat pipe inside the bottom of Kettle/Whirlpool tank.
As this way can not only save cost by saving steam boiler, but also save space for operation.   

Work Flow Process in 2-vessels brewhouse

Mashing is the process of combining a mix of milled grain and water and heating this mixture in a vessel called a "mash tun". For the mash/Lauter tun, the wort lautering process will also be finished in this "mash tun". Then the wort will be transferred into Kettle/Whirlpool tun. After 1 hour’s wort boiling and 30 minutes’ whirlpooling process, the wort will be cooled immediately by heat exchanger.  
2-Vessels Brewhouse Configuration

1 2-Vessels Brewhouse Unit Mash/Lauter/Whirlpool tun 800L (with 25% head space) Side mounted grain outdoor with grain chute
Laser cutting V-wire False Bottom
Tangential whirlpool inlet
Kettle 800L (with 30% head space) Steam heating(electricity and gas fire for optional )
Sanitary leveling sight glass
Yeast feeder 10L Tri clamp aeration port with ball valve
Heat exchanger 8m2
(Effective area)
Completely 304 SS Corrugated plates
Wort Pump 3m3/h, ABB, Sanitary SUS304, VFD control
Pipe and fittings As design completely SS304, Work Platform is included

Tag: 800l brewhouse / 800L 2 vessel brewhouse / 800L brewhouse pub /



Product Name: 800L 2-vessels Brewhouse




Click image to refresh

Copyrights @ Tiantai Beer Equipment Co., Ltd. All Rights Reserved


About Us Brewery Equipment Brewery Service Reference Gallery News Blog Contact Us