Search

Blog

Where is the chiller placed when you build your brewery 

Where is the chiller placed when you build your brewery
 
In general, we suggest our customer to put the chiller outside firstly, to use the air as a heat sink.

The location and installation of the air-cooled chiller should consider the following points:
1. Prevent re-circulation of exhaust air by placing chiller in an open area to enable the smooth flow of air to the condenser section.
2. Community noise must be addressed. And, on the roof applications, vibration, should be taken into account.
3. Access service should be considered. Land areas are preferred roof just because access easier.

But sometimes it is limited by the space, we need to put the chiller inside or on the roof. Does it works?
My answers is depends. When you consider to put the chiller inside, you need to ensure that the space have a good air circulation (The top of the chiller is more than two meters from the ceiling). When you consider to put the chiller on the roof, you need put the glycol water pump out and put it on the ground, this is because many glycol pumps have a short suction and long lift, you can confirm it with supplier. If you can meet these two conditions, you can put the chiller inside or on the roof. if you can't, you have to find another way.
 
 
Sales manager
Amy Chen
[email protected]
 

Get In Touch

Click image to refresh

Do something for your dream.
Start from selection

Contact now
Request A Quote

Request A Quote

Click image to refresh