10bbl brewing syste
" We appreciate the customers’ feedback about our beer brewing equipment.
This is the energy for us "...
France customer ins
" 2000L three vessels brewhouse are finished in our factory.
Our customer inspected his beer brewing e "...
10bbl brewing syste
" Today, we share some pictures of beer equipment with everyone,
which are feedback from Argentina pu "...
Different kinds of
" Today, we want to introduce four kinds of CIP cleaning system for the brewery. "...
1500lts 5 vessels b
" Now the 1500lts brewhouse is shipping to Netherlands,
we believe our customer will receive his brew "...
1000lts Combined th
" Today we want to introduce another system, which is combined three vessels.
Actually, there are two "...
500lts two vessels
" We will attend the Exhibition in Nuremberg, German on October.
And we will take the Microbrewery sys "...
2500lts brewing sys
" We have finished the whole brewhouse, connected pipe lines,
and then test the brewery system.
1000lts brewery sys
" Recently, our engineer has finished the 1000lts brewery system in Russian. "...
Tiantai in Brewkon
" Tiantai in Brewkon 2018 Australian
We attend Brewkon 2018 in Australia from 26th to 28th June. "...
1000L Micro Fermentation Vessels for Sale
Beer Fermenter is also called CCT’s (Cylindrical Conical Tanks), FV’s (Fermentation Vessel), primary fermentor or unitanks as they are used both for fermenting and lagering. Fermenting is the process during which the yeast transforms the wort into beer, usually the fermenting process will be divided into primary fermentation and secondary fermentation. With the equipment upgrade, the primary fermenter and secondary fermenter are combined into one tank named unitanks, the fermentation time is different from 10days to 3 weeks or even longer because of different beer.
The beer fermenter can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as overpressure and under pressure valve, CIP cleaning jet, sanitary sample valve, manhole,dry hopping, etc.
1000L Micro Fermentation Vessels Specification
Beer Fermenter Series
1000L Beer Fermenter
Volume by US Gallon
1000L Micro Fermentation Vessels Configuration
Design pressure 45 psi (3bar); working pressure 15psi (1bar)
4 stainless steel legs with leveling footpads
Interior shell: 304 stainless steel, thickness 3mm
Exterior shell: 304 stainless steel, thickness 2mm
Interior and exterior finish bright polish to 0.6～0.8, hygiene surface
60 degree cone bottom, other angles can be specified during the design process
Combined drain extensions and beer port in cone are standard
25% headspace, unless a different volume is requested
Top manway or side manway door
Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
Fully welded exterior shell
Non welding CIP arm and rotating 360 degree reach spray ball
Solenoid relief valve, pressure relief valve (safe valve) are standard
Temperature sensor well
Sanitary sample valve and port
All clamps and gaskets to attach all accessories
Tank complete with piping, fittings, sanitary valves and all parts.
Carbonation port is available for special request (stone not included)
Ladder hooks is available for special request
Dry hop ports and/or hop bag hooks in any fermenter of any size for special request
If you are would like to change, add, remove or modify any part of the tanks, we can accommodate that. Specific fitting sizes, changes and locations will be set during the design process after a deposit is taken.
fermentation equipment /
10bbl fermenter /
fermentation vessels for sale /
1000L micro fermentation vessels /
REQUEST A QUOTE
Product Name: 1000L Micro Fermentation Vessels for Sale