A high quality beer brewing system is must from the source of raw materials . TIANTAI beer equipment company dedicates high quality brewery system, so we must do the best to provide high quality raw materials. Let’s share more on the materials, polishing and welding to help you learn the important source.
1. Materials
It is the Stainless Steel 304/316/316L from the biggest steel company in China.
Like TISCO , it was founded in 1934 and is in the list top 500 enterprises in the world. It is also a government company. It is China's super large steel joint enterprise and the world's largest stainless steel manufacture capacity enterprise with the advanced technology and equipment.
2.The thickness of the stainless steel plate
Most of the suppliers are quoting with 3mm interior shell and 2mm exterior shell. In fact, the real thickness is only 2.5mm and 1.5mm. You may find the thinner sheet(plate) will easily distort after welding because of the high temperature. 3mm and 2.5mm, that is about 16% difference in weight. So this part is what customers can not test. It’s not good,but really happened.
3.The polishing and Welding
3.Inside polishing to 0.2~0.4 μm without dead corner.
4.Acid Wash Passivation
Now we do the acid wash passivation to the interior of the tanks so that it can form a protect layer which can protect stainless steel from being corroded easily. For all the welding, we will also do the Acid Wash.
We always believe that only by doing well from the source can we make steady progress. TIANTAI beer equipment company is not only a cold factory, but still a warmest team! If you are looking for beer brewing system now, please don’t miss your capable assistant.
Edited By Daisy
[email protected]
Get In Touch