Single boil addition in Tiantai brewhouse equipment

For many micro brewery, they use a single hop addition instead of having short duration flavor and aroma hop additions in the brew house equipment. To set the base bitterness level, and then layer on whirlpool and dry hops if needed to add a burst of aroma. This is a more efficient use of the hops. If using a blend of hops, you can still add them together for a long single boil.
micro brewery equipment, brew house, brewhouse equipment, 2bbl brewhouse, 3bbl brewhouse, 5bbl brewhouse, 7bbl brewhouse, 10bbl brewhouse, 20bbl brewhouse, 30bbl brewhouse

micro brewery equipment, brew house, brewhouse equipment, 2bbl brewhouse, 3bbl brewhouse, 5bbl brewhouse, 7bbl brewhouse, 10bbl brewhouse, 20bbl brewhouse, 30bbl brewhouse

So how long to boil the single addition? For most beers, 60 minutes is a good boil time to target. Though you may be using a 90 minute boil overall, boiling certain hop varieties like Fuggles can result in some vegetal off flavors if you boil too long. Similarly if your boil time is too short you will get poor utilization, which is why I picked 60 minutes as a good compromise where you get good utilization without a high chance of off flavors.

When back in 1987 it was very common to use short duration, (5, 10, 15 minute) hop additions which were called “Aroma additions”. The idea being that these short duration additions at the end of the boil would preserve delicate aroma oils from the hops. Even at this point it was well understood that the aroma oils in hops were volatile and did not survive a full length boil well.

We also had intermediate duration additions (30, 20 minute) that were called “flavor additions”. These were meant to be a compromise between adding some bitterness while still preserving some aroma oils in an attempt to maximize the overall flavor profile from the ops.

About 12-15 years ago the rise of the Craft Brewing revolution here in the US, as well as rising popularity of American Pale Ale and IPA styles kicked off some serious research into identifying, quantifying and characterizing aroma hop oils. Eventually studies were done to determine the volatility of hop oils in the boil.

So if even short duration (5, 10 minute) aroma hop additions boil off a substantial portion of the aroma oils in hops. Instead you can move to a single boil addition to provide the base bitterness (IBU) level you are targeting, and then take hops you might have used for a short boil addition and instead move those to the whirlpool or dry hop with them.
Tiantai company provide brewhouse equipment to apply to single hop addition, it ranges from 2 vessel, 3 vessel, 4 vessel, capacity can be 2bbl, 3bbl, 5bbl, 7bbl, 10bbl, 20bbl, 30bbl, etc. Contact us to get best offer!
[email protected]
Emily Gong

Tags: micro brewery equipment 　　 brew house 　　