CE mark European is one of biggest market for microbrewery, and export to European should concern about CE certificate, it affect the customs clearance at the destination, also conform to local permit. There are some know...

Barley 1) Why does we choose barley as material for brewing beer ? ①barley is easy to burgeon, which producingamounts of hydrolases. ②The chemical composition of barley is suitable for brewing beer. ③barley is culti...

Which type of work platform do you like? Between brewhouse vessels,there are work platform for brewer master to work on it, for example feeding material, checking the boiling condition, stirring by manual, test wort plato...

How to do the Conditioning ? Conditioning is an important progress for a microbrewery. Usually it is done in uni-tank or a bright beer tank. Also it is possible to do in bottles and cask. After an initial or primary ferme...

Several types of Malt Hydrator In a brewery, mashing is the first progress to get the mash. Malt hydratoris an important device to do the pre-mashing. It is usually put on top of the mash tun. First let us introduce the m...

The Cooling Jacket for Whirlpool Tun What? There is cooling jacket for the whirlppl tun in brewery system? Yes! We do have a customer who requested this! Usualy the hops are added in the kettle. It can also use hop back t...

How to pump reasonably during lautering? Recently some young brewers have problems during lautering, so here we would like to share some tips about this process: 1.Barley malt There are 20mm between the rake and false bot...

Why beer has many foam in plastic disposable cup? As we talked before, CO2, carbohydrate, water and protein combined the foam. Protein plays a critical role in foam. There are long chain protein and short chain protein in...

Whats the difference for British IPA and American IPA? IPA(India Pale Ale) is a kind of beer that added much hops, thus the beer can keep a good quality during a long travel. The ideas came from George Hodgson of Bow brew...

Fermentation tank characteristic: 1.Cone degree is among 60-90 degree 2.Cooling jacket area: tank cylinder should have 2-3 cooling jacket area, cone should have one cooling jacket area. 3.Conical fermentation unitank shou...

What is the conversion between HP and BTU for glycol chiller As we know, different target cooled temperature will bring different cooling capacity for same one chiller. In beer brewing, the target temperature would be -5℃...

What type CIP ball should I choose for cleaning brewery equipment? There are three types CIP ball: fixed CIP ball, Rotating CIP ball and rotary jet. 1)Fixed CIP: Pros: The clean pressure is low, among 0.15-0.25Mpa. Cons: ...